1. Log on to your PC computer with an account that has administrative privileges.

2. Open the Start menu and click on the “Control Panel” icon.

3. Open the “Administrative Tools” folder and then double-click on the “Services” icon.

4. Scroll through the list of system services until you find “Print Spooler.”

5. Highlight “Print Spooler” in the list of services and click on the “Start” link on the left side of the window.

6. Restart your computer and then attempt printing a document or image again. The Error 1068 should no longer appear.

Source: ehow.com

Here’s how to fix Windows 7 Printer Error 0x0000007e if you also notice that your “Language for non-Unicode” setting are correct:

1. Download the latest Windows 7 printer drivers (be sure to choose x32 or x64 depending on your machine) from the manufacturers website. I am installing an HP Laserjet 5550N in my case, and I downloaded the latest PCL6 drivers for Windows 7 x64 and extracted them on my macine.

2. Go to the extraction folder and run the setup.exe or install.exe program. This part was new to me but very slick… the driver installation loaded and asked me to provide the location of the printer I wanted to install.

3. Choose to install a “network printer” and select it from the list. Hit next.

4. At this point you can either select to find updated driver from Windows Update or choose “have disc” to manually select the *.inf file that was extracted via the driver download. I actually chose the Windows Update option for fun and grins, and it searched, located, and properly installed the correct drivers for my machine automatically.

5. Print a test page once you complete the rest of the installation screens. Note: Depending on your installation package, you may have slightly different setup screens but I suspect that the steps would be very similar.

So, in reality I never used the drivers that I downloaded since Windows Update found them for me. The end result is this though… you can add a network printer that is hosted on Windows Server 2003 to a Window 7 machine if you install the drivers locally but specify that you want to use the network printer (select the printer from the list or provide it’s IP address).

I still haven’t found a way to actually host the Windows 7 drivers on the Windows 2003 print server though, but with this fix you don’t need to. You can still install and print to the network printer with the drivers installed locally. If I’m not mistaken, when you install a printer from a printer server the drivers are still installed locally… it’s just the print server is your driver source rather than downloading and extracting the same drivers locally. So as I see it, my method is the “same difference”

A print spooler is software that temporarily stores print jobs on the computer hard disk or in memory until the printer is ready to print them. If you’ve been waiting an unusually long time for a document to print, or if you see an error message about the print spooler, spooler subsystem, or spooler resources, you might need to change and then restart the Print Spooler service on your computer.

To do this, we recommend that you save your work, and then restart the computer to restart the Print Spooler service. If you don’t want to restart the computer, try these steps instead.

To change or restart the Print Spooler service

You must be logged on as an administrator to perform these steps.

1. Open Administrative Tools by clicking the Start button , clicking Control Panel, clicking System and Maintenance, and then clicking Administrative Tools.

2. Double-click Services. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

3. Right-click the Print Spooler service, and then click Properties.

4. On the General tab, next to Startup type, make sure that Automatic is selected.

5. If the service is not already running, under Service status, click Start, and then click OK. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

Run a command prompt and type the following:

net use LPT2: \servername\printer

This sets up a behind-the-scenes connection to the printer.

Then go through the add printer wizard, choose to add a local printer, and choose port LPT2… It will probably ask for a printer driver, and you can just choose whatever XP driver you might have been using before. The printer is then installed without any errors, and works just fine.

From poking around, it seems when the error appears that the driver is actually installed, but something between it being installed and it actually being added to vista’s list of printers breaks. Doing the above just works though.

The error on the LCD of the printer is 6A00. Anyone know what this is about? I called Canon and they suggest I drive the machine to the nearest Canon approved repair center (which is 3 hours away) and have it looked at…so I am trying to avoid this if possible. Any advice would be greatly appreciated. Thanks.

Solution :

The 6A00 is a Canon generic code for paper path jam. Some where in the paper path a sensor is activated indicating paper jam so the printer will give off a 6A00 code. As a Canon tech, I usually find the code, almost 90% of the time, is related to the purge unit being jammed with something and not being able to move. Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like. And yes I have found all those things in a purge unit. The offending item needs to be removed or the purge unit needs replacement. A Pixma MP830 would still be under Canon warranty, get it into a shop and save yourself the hassel.
Incidently, the 6A00 error pertains to all Canon printers made in the last several years, its not just used in one model. And its always a paper path error or purge unit.
I forget myself so here goes, the purge unit, called a spittoon assembly in an HP, lexmark, and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing. That is why you’ll find the print head assembly parked on top of it. It also has a an electrical pump to milk the print heads and test for ink flow.

Problem:

Solution:
Windows 7 laptop will not Shutdown issue could either be Software or Hardware related. Boot into Safe Mode and check if you can shut down properly.
Boot your computer in Safe mode.
If a problem doesn’t reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes.
Perform a hardware clean boot to determine if any hardware is posing this problem.
1. Go to start and type device manager.
2. Select device manager from the Control Panel list.
3. Right Click on Sound Card, Video Adapter, and Network Adapter one by one and click disable.
4. Reboot the computer. If the problem is fixed then you can enable the hardware devices one by one to find the exact device that caused the problem.
After you found the device that is causing the problem, installing the device’s latest driver should fix it unless it’s a hardware issue.

I have a Dell laptop with Windows XP and a HP 1012 Laserjet. The laserjet has been working fine and suddenly yesterday evening it stopped being able to print. I get the message: print spooler service is not running. I have tried a lot of things I found on the internet to get it going again but nothing has worked so far.

Solution :

- Turn off the printer

- Turn off the computer

- Turn on the computer and wait until it has completely loaded

- Turn on the printer

Once the printer has fully started, go into the driver’s properties from the Printing and Faxing window and try to send a test page. If it still says the spooler is not running then in the Control Panel, open Adminstrative Tools and select Services. Scroll down the list and select Spooler – does it say started? If you right click on it, can you start it? If it’s set to manual change it to Automatic. If it doesn’t want to start or isn’t in the list then you have an issue with your operating system. Check the MS knowledge base for help with spooler issues.

If it looks good and started and set to automatic and your printer still won’t print then try this test. Open a word document and select print. Look for a small check box next to print to file. What this will do is spool out the document but then save it to the hard drive instead of sending it to the printer (it will ask you to name the file and give you a chance to save it to where you want). If this works with no errors then the issue is likely the printer.

If it’s the printer then try a different cable, check to see if you can upgrade the firmware.

If print to file doesn’t work, you can try uninstalling and reinstalling the driver.

We all use windows 7 as it’s the newest and advanced version of Microsoft. Many people face problem while doing work on windows 7. Crashing and Freezing are the common problems which happens. The two may seem the same but they are different from each other.

A crash is when the computer can’t process the user’s request and it shuts down or restarts or may shows the Blue Screen of Death.

A freeze is the state when the user is trying to do too many things at once and the computer can’t keep up with the requests, it cannot read the file because it is confused. These are common problems of the Windows 7 operating system. Many people are experiencing these problems on their Desktop or Laptops.

These problems may sometimes go very to serious, that it may destroy your important data and even sometimes destroys your whole PC. However, in most of the cases, they are only mild causes as the symptoms aren’t that serious.

The causes of Windows 7 crashing are as follows:

1. Specific files are not readable.

2. Files have been corrupted or may damaged.

3. The registry settings are unstable and have some issues.

4. Recently changed hardware or may cause from new hardware.

The causes above contribute to Windows 7 for becoming an unreliable and unstable system. These problems can be fixed by following some of the steps that I’ve described below. I am going to explain you how to repair and prevent Windows 7 from crashing in the future. Continue

The worst thing that can happen to a Windows 7 user is the Blue Screen of Death or we can say BSOD. Suppose you are doing some important work and your computer flashes a blue screen! It’s Very frustrating. This error occurs when operating system fails to perform further operations.

Here are few things to quickly fix Windows 7 Blue Screen of Death issue.

If you are using a desktop computer then try to install a better cooling fan or you can turn off your computer for sometime and start computer again.
It may happen when there is low RAM in the computer system. Some applications and programs need more memory space to run. By adding extra RAM your computer become much then its current performance. Continue 

I’m currently seeing the error on the same hardware, it is related to a pending print job on a machine connected to it, as soon as the printer inits, the job is sent to it and the 49.4c02 error pops up.

Solution :

1. Press CANCEL JOB to clear the print job from the printer memory.
2. Turn the printer off, and then turn the printer on.
3. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.)
4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer.
5. Turn the printer off.
6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lowest DIMM slot.)
7. Remove all EIO devices from the printer.
8. Turn the printer on.
9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device.
10. Replace a DIMM or EIO device if you determine that it causes the error.
11. Remember to reconnect all cables that connect the printer to the network or computer.
12. If the error persists, replace the firmware DIMM.
13. Replace the formatter.

This error is usually caused by a bad formatter board.